Invacare wheelchair design focuses on functionality, usually with features such as quick release, folding, and flipping, which are convenient for users to use in different scenarios. For example, the quick release design makes the wheelchair more convenient to carry and store, and the folding function makes it easier for users to store and transport.
The appearance design of the wheelchair follows the principle of simplicity and elegance, with smooth lines and beautiful shapes. The crystal dome label designed and produced by XINBIXI is designed and installed under the armrest of the Invacare wheelchair. The blue tone is matched with white fonts, highlighting the brand culture and characteristics. This design style not only makes the wheelchair look more fashionable, but also enhances the user experience.
In terms of color matching, it focuses on harmony and beauty, and usually chooses warm and comfortable tones such as white, gray, blue, etc. to create a relaxed and pleasant use environment.
The material of the wheelchair usually chooses high-quality and environmentally friendly materials such as aluminum alloy, stainless steel, high-density foam, etc. to ensure the durability and safety of the wheelchair.
There are many important steps in the production process of the Invacare wheelchair crystal dome label, which ensure the quality and visual effect of the final product.
1. Design preparation:
In-depth understanding of Invacare’s core values, positioning, target customers and market positioning to ensure that the logo can accurately convey the characteristics and concepts of the brand.
Design the trademark pattern according to the brand requirements, ensuring that the pattern is clear, the lines are smooth, and it is in line with the brand image.
Prepare crystal glue, substrate: such as PVC, metal, plastic, etc. These substrates will be used as the carrier of the logo.
2. Substrate treatment
Cleaning and drying:
Clean the selected substrate to remove surface impurities and stains.
Dry the cleaned substrate to ensure that the surface is dry and free of moisture.
Substrate placement:
Place the treated substrate flat on the operating table and prepare for the dripping operation.
3. Drip operation
Place the pre-mixed glue in a vacuum drying oven to further remove bubbles to ensure the quality of dripping.
Use a special needle or dripping equipment to evenly drip the defoamed crystal glue on the pre-treated substrate.
According to the design pattern, control the amount and position of the drip glue to ensure that the shape and size of the logo are accurate. ,
4. Curing treatment
Room temperature curing:
Place the logo after dripping at room temperature of 20°C~30°C for curing.
The curing time is generally 10 to 24 hours, depending on the type of glue and room temperature.
Observation and trimming:
During the curing process, pay attention to whether there are bubbles or dust particles on the surface of the logo.
If necessary, use tools such as pins to trim in time to ensure that the logo surface is flat and smooth.
V. Post-processing
Cleaning and edge removal:
Cleaning the cured drop-molded logo to remove impurities and glue residues on the surface.
Edge removal is performed to ensure that the edges of the logo are neat and there is no residual glue.
Quality inspection:
Quality inspection of the completed drop-molded logo is carried out to ensure that it meets the design requirements and quality standards.